machine#designs: lathe: lathe_parts
Dave_Gingery: series: lathe: lathe_parts
Gingery Lathe Parts List
Tools required:
| name | Cost Estimate (USD) |
| aluminum casting equipment | 0-200 |
| chisel/scraper | 0-5 |
| hacksaw with extra blades | 2-6 |
| 3/8" hand drill | 10-60 |
| try square | 2-10 |
| straightedge | 1-5 |
| pencil/scriber | 0.25-2 |
| bench grinder | 5-50 |
| could sub hand grinder HF | 15 on sale |
| files flat, small triangle |
| drill bits |
| taps sae 10-24, 1/4-20 , 3/8-16 |
| wrench for bolts |
| allen wrench for socket head cap screws |
| screw driver for 10-24 screws |
shop supplies
| blue oil paint for scraping |
| plastic wood or auto body putty for pattern fillets |
| popsicle sticks to smooth fillets |
| wood and plywood for patterns |
| wood and plywood for flasks |
| sand |
| charcoal for furnace |
steel stock for parts
| 5/8 square keystock or CRS for lathe dog |
| 1/2 x 3/8 shoulder bolt for bit holder |
| 1/2 x 3/8 shoulder bolt for lead drive reducer pulley shaft |
| 3/4 drill rod |
| 5/8 drill rod |
| 1/2 drill rod |
| 3/8 threaded rod leadscrew |
| 3/8 th rod, split nut threads, split nut core per casting |
| 1/4-20 th rod cross feed, compound, tailstock ram feed screws |
| 1/4 iron pipe leadscrew journals |
| 1/4 square bar stock key stock or CRS for gibs |
| 1/4 x 3/4 bar stock CRS for gib clamps |
| 1/4/ x 1 bar stock CRS for gib clamps |
| 1/4 x 2 bar stock all ways except main way |
| 1/4 x 3 bar stock CRS main way bed length + pieces for fitting |
| angle iron for temporary head stock |
motor and speed control
| electric motor |
| electric cord |
| electric on off switch |
| motor mounting bracket assy |
| step pulley idler and release lever assy |
| headstock step pulley |
| spindle pulley for lead screw drive |
| reducer pulley for leascrew drive |
| leadscrew pulley |
| round belt spindle to lead screw idler |
| round belt lead screw idler to lead screw |
| v belt motor to idler |
| v belt idler to spindle |
other moving parts
| brass bushings for lead screw journals |
| brass bushing for spindle |
| 1/4 shaft collars for feed screws |
| other shaft collars |
temporary parts
| pillow blocks for temporary spindle |
Lathe Bed Assembly
| Quantity | Part Name | Part Description | Page(s) | Cost |
| 1 | Bed Casting | | 17-20 | |
| 2 | Base Casting | | 17-20, 27 | |
| 1 | Bed Ways | 3.0"x 24.0"x0.25" cold rolled steel (1018?) | 25 | |
| 2 | Ways Cap Screws | 3/8"-16x3/4" bolt | 26 | |
| 1 | Headstock/Ways Stud | 3/8 in - 16 x 3.25 in threaded rod | 26 | |
| 1 | Tailstock/Ways Stud | 3/8"-16x2.25" threaded rod | 26 | |
| 6 | | Flat Washers for 3/8"-16 threaded rod/screws | 26 | |
| 6 | | Lock Washers for 3/8"-16 threaded rod/screws | 26 | |
| 4 | | 3/8"-16 nuts | 26 | |
Lathe Carriage Assembly
| Quantity | Part Name | Part Description | Page(s) | Cost |
| 1 | Carriage casting | | 28 | |
| 2 | Carriage Clamps | 1"x3"x0.25" CRS | 31 | |
| 1 | Carriage Gib Strip | 0.25" square key stock | 30 | |
| 1 | | | | |
| 1 | | | | |
| 1 | | | | |
| 1 | | | | |
| 1 | | | | |
| 1 | | | | |
Lathe Carriage Assembly
| Quantity | Part Description | Picture | Page(s) | Cost |
| 1 | Carriage Casting | | 28 | |
![[PukiWiki]](image/pukiwiki.png "[PukiWiki]")
